Welcome to Ningbo Freedom import&export Co.,Ltd.
Classification and selection of high temperature preloaded disc springs
Release time:
2021-11-12 11:01
Measure and load the load of the combined disc spring on a testing machine with an accuracy of not less than 1%. (I≤10 pieces, butt combination) Use lubricant in the test, and the hardness of the pressure plates at both ends needs to be above 52HRC.
Deformation of the disc spring The finished disc spring is compressed on the testing machine for 3 times, and the free height is measured after the second and third compressions.
The hardness of the disc spring shall be implemented in accordance with the provisions of GB/T230.1 or GB/T440.1. With a thickness of 1mm and a thickness of >1mm, the test indentation on the Rockwell hardness tester should be in the center of the surface of the disc spring. 4 points for each item, one point is not evaluated, and the average of the last 3 points is taken
The single disc spring is tested on a fatigue testing machine with an equal sine wave load. The test can be performed on a single piece or it can consist of less than or equal to 10 pieces of samples. The combination test needs to be preloaded before using the required tooling test, the deformation of a single piece is f=(0.15~0.2)ho, and the stress amplitude is determined according to the service life requirements as shown in the figure.
(1) The characteristics of the disc spring are as follows:
1. High rigidity, strong buffering and vibration absorption ability, can bear large load with small deformation, suitable for occasions with small axial space requirements.
2. With stiffness change characteristics, the spring has a wide range of nonlinear characteristics.
3. Using the same disc spring with different combinations can change the characteristics of the spring to a great extent. A combination of involution and stacking can be used, and a combination of different thicknesses and different numbers of sheets can also be used.
Compared with the same deformation, the more springs, the greater the load.
Previous page
Recommended news
Several issues that cannot be ignored when selecting Dongming fastener manufacturers?
The production of Dongming fasteners involves many aspects of professional knowledge, and it has many advantages when used. Therefore, it is welcomed by the market. For customers, it is very important to choose a professional and reliable Dongming fastener manufacturer at this time. If you don't know how to choose, let's learn together.
Explain the application of disc spring in detail
To a large extent, disc springs are replacing cylindrical coil springs. It is often used in buffer and vibration damping springs for heavy equipment such as presses, compression springs for clutches and safety valves in automobiles and tractors, and energy storage devices for motorized equipment.
What are the characteristics and applications of high temperature disc springs?
Features of high temperature disc spring: a. Changes in medium pressure lead to changes in preload. The high temperature disc spring can compensate for the change of preload force caused by the change of medium pressure and prevent the failure of bolts and washers.
What is the principle of ice maker
The ice maker automatically enters a water storage tank through the make-up water valve, and then sends the water through the flow control valve to the shunting head through the water pump, where the water is evenly sprayed on the surface of the ice maker and flows through the wall of the ice maker like a water curtain. At this time, the water will be cooled to the freezing point, and the water that has not bee
How to remove the odor in the refrigerator
The lemon we usually eat can also remove the peculiar smell in the refrigerator. The use of lemon to remove refrigerator odor requires that fresh lemon be cut into slices and placed in each corner of the refrigerator, which can not only remove the odor in the refrigerator, but also make the refrigerator have a lemon scent. After putting the lemon in the refrigerator for a few days, we need to take out the dried lemon, and then put a new 'lemon' until the odor in the refrigerator is completely removed.
Working principle of semiconductor refrigeration chip
1. Peltier effect means that when current passes through the circuit composed of different conductors, in addition to irreversible Joule heat, heat absorption and heat release will occur at the joints of different conductors with different current directions.